Neofit® +Plus System
Neofit®+ Plus System is a non-invasive pipe lining system especially designed for small
diameter potable water service piping. The Neofit®+ Plus Liner seals small leaks and pinholes in 1/2"
thru 2" ID service piping. It also acts as a barrier between existing lead piping and potable drinking
water. The Neofit®+ Plus Liner is NSF-61 approved and has been tested to a minimum 50+ year life expectancy.
The patented Neofit®+ Plus System System is capable of lining up to 300ft (U.S. Patent No. 8,807,171).
- Cost Effective
- Time Saving
- Environmentally Friendly
Manufactured by Wavin
Distributed by Flow-Liner®
Neofit® liner extreme testing:
- Stand alone Neofit® liner tested for 48 hours @ 200 psi with no leaks
- Stand alone Neofit® liner burst test as per ASTM D1599 for pressure testing of structural piping. The stand alone Neofit® liner burst @ 460 psi (See Video).
- Neofit® liner installed in PEX tubing with 3/8 inch holes in the PEX every 8-12 inches. The fittings used were compression style with the Neofit® liner having a flange at each end. This would represent an extreme leaking water service lining installation. The Neofit® lined pipe was pressurized to 150 psi and held for 48 hours with no leaks (See Video).
Neofit® is a class-C semi-structural liner. Neither Flow-Liner® nor Wavin are making any claims
that Neofit® is classified as a stand alone liner or classified as a structural pipe. These extreme tests and videos
are only to show the strength of the Neofit® liner.
Fitting configurations for Neofit®